View BFC233810683_6994939.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

mkp338 1 x1 www.vishay.com vishay bccomponents revision: 18-jul-13 1 document number: 28116 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 interference suppression film capacitors mkp radial potted type features ? 15 mm to 27.5 mm lead pitch ? supplied loose in box, taped on ammopack or reel ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications for standard across the line x1 applications. see also application note: www.vishay.com/doc?28153 note ?for more detailed data and test requirements, contact rfi@vishay.com quick reference data capacitance rang e (e12 series) e12 series 0.01 f to 1 f preferred values acc. to e6 capacitance tole rance 20 %, 10 %, 5 % rated ac voltage 440 v ac ; 50 hz to 60 hz permissible dc voltage 1000 v dc climatic testing clas s acc. to iec 60068-1 50/105/56/c for prod uct volumes > 1750 mm 3 50/105/56/b for volumes ? 1750 mm 3 maximum application temperature 105 c reference standards iec 60384-14 and en 60384-14 iec 60065 pass. flamm. class b for volumes > 1750 mm 3 ul 60384-14 dielectric polypropylene film electrodes metallized film construction mono construction encapsulation plastic case, epoxy resin sealed, flame retardant ul-class 94 v-0 leads tinned wire marking c-value; tolerance; rated voltage; sub-class; manufacturers type; code for dielectric material; manufacturer location, year and week; manufacturers logo or name; safety approvals dimensions w ? d t p h l l t
mkp338 1 x1 www.vishay.com vishay bccomponents revision: 18-jul-13 2 document number: 28116 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 composition of catalog number note (1) for detailed tape specification refer to packaging information: www.vishay.com/doc?28139 note (1) see voltage proof test for metallized film capacitors: www.vishay.com/doc?28169 specific reference data description value rated ac voltage (u rac ) 440 v permissible dc voltage (u rdc ) 1000 v tangent of loss angle: at 1 khz at 10 khz c ?? 470 nf ? 10 x 10 -4 ?? 20 x 10 -4 c > 470 nf ?? 20 x 10 -4 ?? 70 x 10 -4 rated voltage pulse slope (du/dt) r at 615 v dc pitch = 15 mm 250 v/s pitch = 22.5 mm 150 v/s pitch = 27.5 mm 100 v/s r between leads, for c ? 0.33 f at 100 v, 1 min > 15 000 m ? rc between leads, for c > 0.33 f at 100 v, 1 min > 5000 s r between leads and case, 100 v, 1 min > 30 000 m ? withstanding (dc) voltag e (cut off current 10 ma) (1) , rise time ? 1000 v/s 3400 v, 1 min withstanding (ac) voltage betw een leads and case 2380 v, 1 min maximum application temperature 105 c example: 104 = 10 x 10 = 100 nf (except special numbers) bfc2 338 1x xx x s e p y t d e r r e f e r p l. o t - c l. o t - c n o i t a r u g i f n o c d a e l g n i g a k c a p e p y t g n i g a k c a p e p y t 338 1 x1 loose in box lead length 3.5 mm 0.3 mm 20 % bfc2 338 10 ... . . . 2 1 8 3 3 2 c f b m m 0 . 1 m m 0 . 5 h t g n e l d a e l . . . 4 1 8 3 3 2 c f b m m 0 . 2 m m 0 . 5 2 h t g n e l d a e l taped on reel (1) h = 18.5 mm; for p 0 = 12.7 mm; reel diameter = 500 mm bfc2 338 17 ... t s e u q e r n o . l o t - c e v i t a n r e t l a 338 1 x1 loose in box lead length 3.5 mm 0.3 mm 10 % see tables for detail 5 % lead length 5.0 mm 1.0 mm 10 % 5 % lead length 25.0 mm 2.0 mm 10 % 5 % taped on reel (1) h = 18.5 mm; p 0 = 12.7 mm; reel diameter = 500 mm 10 % 5 % type and pitches 338 1 x1 15.0 mm 22.5 mm 27.5 mm multiplier (nf) 0.1 2 13 10 4 100 5 capacitance (numerically)
mkp338 1 x1 www.vishay.com vishay bccomponents revision: 18-jul-13 3 document number: 28116 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 electrical data and ordering information u rac cap. (f) dimensions w x h x l (mm) mass (g) (3) catalog number bfc2 338 1xxxx and packaging loose in box taped reel (1)(2) short leads long leads ? = 500 mm l t = 3.5 mm 0.3 mm l t = 5.0 mm 1.0 mm spq l t = 25.0 mm 2.0 mm spq h = 18.5 mm; p 0 = 12.7 mm spq 440 pitch = 15.0 mm 0.4 mm; d t = 0.60 mm 0.06 mm; c-tol. = 20 % 0.010 5.0 x 11.0 x 17.5 1.0 10103 12103 1000 14103 1000 17103 1100 0.012 10123 12123 14123 17123 0.015 10153 12153 14153 17153 0.018 10183 12183 14183 17183 0.022 10223 12223 14223 17223 0.027 6.0 x 12.0 x 17.5 1.4 10273 12273 1000 14273 1000 17273 900 0.033 10333 12333 14333 17333 pitch = 15.0 mm 0.4 mm; d t = 0.80 mm 0.08 mm; c-tol. = 20 % 0.039 7.0 x 13.5 x 17.5 1.8 10393 12393 750 14393 500 17393 800 0.047 10473 12473 14473 17473 0.056 8.5 x 15.0 x 17.5 2.4 10563 12563 750 14563 500 17563 650 0.068 10683 12683 14683 17683 0.082 10.0 x 16.5 x 17.5 3.0 10823 12823 500 14823 450 17823 600 0.10 10104 12104 14104 17104 pitch = 22.5 mm 0.4 mm; d t = 0.80 mm 0.08 mm; c-tol. = 20 % 0.12 8.5 x 18.0 x 26.0 3.8 10124 12124 200 14124 250 17124 450 0.15 10154 12154 14154 17154 0.18 10.0 x 19.5 x 26.0 6.8 10184 12184 200 14184 200 17184 350 0.22 10224 12224 14224 17224 pitch = 27.5 mm 0.4 mm; d t = 0.80 mm 0.08 mm; c-tol. = 20 % 0.27 11.0 x 21.0 x 31.0 7.4 10274 12274 100 14274 125 -- 0.33 13.0 x 23.0 x 31.0 9.2 10334 12334 100 14334 125 0.39 15.0 x 25.0 x 31.5 12.3 10394 12394 100 14394 125 0.47 10474 12474 14474 0.56 18.0 x 28.0 x 31.5 16.1 10564 12564 100 14564 100 0.68 10684 12684 14684 0.82 21.0 x 31.0 x 31.0 20.3 10824 12824 50 14824 75 1.00 10105 12105 14105 pitch = 15.0 mm 0.4 mm; d t = 0.60 mm 0.06 mm; c-tol. = 10 % 0.010 5.0 x 11.0 x 17.5 1.0 18114 18314 1000 18514 1000 18914 1100 0.012 18115 18315 18515 18915 0.015 18116 18316 18516 18916 0.018 18117 18317 18517 18917 0.022 6.0 x 12.0 x 17.5 1.4 18118 18318 1000 18518 1000 18918 900 0.027 18119 18319 18519 18919 pitch = 15.0 mm 0.4 mm; d t = 0.80 mm 0.08 mm; c-tol. = 10 % 0.033 7.0 x 13.5 x 17.5 1.8 18121 18321 750 18521 500 18921 800 0.039 18122 18322 18522 18922 0.047 8.5 x 15.0 x 17.5 2.4 18123 18323 750 18523 500 18923 650 0.056 18124 18324 18524 18924 0.068 10.0 x 16.5 x 17.5 3.0 18125 18325 500 18525 450 18925 600 0.082 18126 18326 18526 18926
mkp338 1 x1 www.vishay.com vishay bccomponents revision: 18-jul-13 4 document number: 28116 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ? spq = standard packing quantity (1) h = in-tape height; p 0 = sprocket hole distance; for detailed specifications refer to packaging information: www.vishay.com/doc?28139 (2) reel diameter = 356 mm is available on request (3) weight for short lead product only 440 pitch = 22.5 mm 0.4 mm; d t = 0.80 mm 0.08 mm; c-tol. = 10 % 0.10 7.0 x 16.5 x 26.0 2.9 18127 18327 200 18527 250 18927 550 0.12 8.5 x 18.0 x 26.0 3.8 18128 18328 200 18528 250 18928 450 0.15 18129 18329 18529 18929 0.18 10.0 x 19.5 x 26.0 6.8 18131 18331 200 18531 200 18931 350 pitch = 27.5 mm 0.4 mm; d t = 0.80 mm 0.08 mm; c-tol. = 10 % 0.22 11.0 x 21.0 x 31.0 7.4 18132 18332 100 18532 125 -- 0.27 18133 18333 18533 0.33 13.0 x 23.0 x 31.0 9.2 18134 18334 100 18534 125 0.39 15.0 x 25.0 x 31.0 12.3 18135 18335 100 18535 125 0.47 18136 18336 18536 0.56 18.0 x 28.0 x 31.0 16.1 18137 18337 100 18537 100 0.68 18138 18338 18538 0.82 21.0 x 31.0 x 31.0 20.3 18139 18339 50 18539 75 pitch = 15.0 mm 0.4 mm; d t = 0.60 mm 0.06 mm; c-tol. = 5 % 0.010 5.0 x 11.0 x 17.5 1.0 18214 18414 1000 18614 1000 18934 1100 0.012 18215 18415 18615 18935 0.015 18216 18416 18616 18936 0.018 18217 18417 18617 18937 0.022 6.0 x 12.0 x 17.5 1.4 18218 18418 1000 18618 1000 18938 900 0.027 18219 18419 18619 18939 pitch = 15.0 mm 0.4 mm; d t = 0.80 mm 0.08 mm; c-tol. = 5 % 0.033 7.0 x 13.5 x 17.5 1.8 18221 18421 750 18621 500 18941 800 0.039 18222 18422 18622 18942 0.047 8.5 x 15.0 x 17.5 2.4 18223 18423 750 18623 500 18943 650 0.056 18224 18424 18624 18944 0.068 10.0 x 16.5 x 17.5 3.0 18225 18425 500 18625 450 18945 600 0.082 18226 18426 18626 18946 pitch = 22.5 mm 0.4 mm; d t = 0.80 mm 0.08 mm; c-tol. = 5 % 0.10 8.5 x 18.0 x 26.0 3.8 18227 18427 200 18627 250 18947 450 0.12 18228 18428 18628 18948 0.15 10.0 x 19.5 x 26.0 6.8 18229 18429 200 18629 200 18949 350 0.18 18231 18431 18631 18951 pitch = 27.5 mm 0.4 mm; d t = 0.80 mm 0.08 mm; c-tol. = 5 % 0.22 11.0 x 21.0 x 31.0 7.4 18232 18432 100 18632 125 -- 0.27 13.0 x 23.0 x 31.0 9.2 18233 18433 100 18633 125 0.33 18234 18434 18634 0.39 15.0 x 25.0 x 31.5 12.3 18235 18435 100 18635 125 0.47 18236 18436 18636 0.56 18.0 x 28.0 x 31.5 16.1 18237 18437 100 18637 100 0.68 18238 18438 18638 0.82 21.0 x 31.0 x 31.0 20.3 18239 18439 50 18639 75 electrical data and ordering information u rac cap. (f) dimensions w x h x l (mm) mass (g) (3) catalog number bfc2 338 1xxxx and packaging loose in box taped reel (1)(2) short leads long leads ? = 500 mm l t = 3.5 mm 0.3 mm l t = 5.0 mm 1.0 mm spq l t = 25.0 mm 2.0 mm spq h = 18.5 mm; p 0 = 12.7 mm spq
mkp338 1 x1 www.vishay.com vishay bccomponents revision: 18-jul-13 5 document number: 28116 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 mounting normal use the capacitors are designed for mounting on printed-circuit boards. the capacitors packed in bandoliers are designed for mounting in printed-circuit boards by means of automatic insertion machines. for detailed tape specifications refer to packaging information: www.vishay.com/doc?28139 specific method of mounting to withstand vibrat ion and shock in order to withstand vibration and shock tests, it must be ensured that the stand-off pi ps are in good contact with the printed-circuit board: ? for pitches ? 15 mm capacitors shall be mech anically fixed by the leads ? for longer pitches the capacitors shall be mounted in the same way and the body clamped space requirements on printed circuit board the maximum space for length (i max. ), width (w max. ) and height (h max. ) of film capacitors to take in account on the printed circuit board is shown in the drawings. ? for products with pitch ? 15 mm, ? w = ?? l = 0.3 mm; ? h = 0.1 mm eccentricity defined as in drawing. the maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. soldering for general soldering conditions and wave solder ing profile, we refer to the application note: ? soldering guidelines for film capacitors : www.vishay.com/doc?28171 storage temperature t stg = - 25 c to + 35 c with rh maximum 75 % without condensation ratings and characteristics reference conditions unless otherwise specified, all electrical values apply to an a mbient temperature of 23 c 1 c, an atmospheric pressure of 86 kpa to 106 kpa and a relative humidity of 50 % 2 %. for reference testing, a conditioning period shall be applied ov er 96 h 4 h by heating the products in a circulating air oven at the rated temperature and a relati ve humidity not exceeding 20 %. approvals safety approvals x1 voltage value file numbers en 60384-14 (enec) (= iec 60384-14) 440 v ac 10 nf to 1 f fi 2013013 ul 60384-14 440 v ac 10 nf to 1 f e354331 csa e384-14 440 v ac 10 nf to 1 f e354331 cb-test certificate 440 v ac 10 nf to 1 f fi 5256 a1 the enec-approval together with the cb-certificate replace all national marks of the following countries (they have already sig ned the enec-agreement): austria; belgium; czech. republic; denmark; finland; france; germany; greece; hungary; ireland; italy; luxembo urg; netherlands; norway; portugal; slovenian; spain; switzerland and united kingdom. cba116 eccentricity w max. = w + h max. = h + i max. = i + seating plane
mkp338 1 x1 www.vishay.com vishay bccomponents revision: 18-jul-13 6 document number: 28116 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 characteristics capacitance as a function of ambient temperature (typical curve) tangent of loss angle as a function of frequency (typical curve) impedance as a func tion of frequency (typical curve) resonant frequency as a function of capacitance (typical curve) ? max. rms voltage as a function of frequency max. rms current as a function of frequency typical - 50 c/c (%) 2 - 2 - 4 - 6 0 050100 t amb (c) 4 min. max. dissipation factor (x 10 - 4 ) 10 10 10 10 10 10 10 10 10 1 234 5 0 1 2 3 f(hz) c = 1 f 220 nf < c < 1f 47 nf < c 220 nf 10 nf < c 47 nf 10 5 10 4 10 6 10 7 10 8 f (hz) 10 3 10 0 10 -1 10 2 10 1 10 -2 impedance ( ) 1000 nf 470 nf 100 nf 47 nf 10 nf 10 0 10 -1 10 2 10 1 f (mhz) 10 100 1000 10 000 c (nf) x 1 1 t amb 105 c ac voltage (v) 10 3 10 2 10 1 f (hz) 10 1 10 2 10 3 10 4 10 5 10 2 10 3 10 4 10 1 10 0 10 -1 10 2 10 1 10 3 10 4 10 5 f (hz) 470 nf 100 nf 47 nf 10 nf 1000 nf 1 nf 4.7 nf ac current (ma) t amb 105 c
mkp338 1 x1 www.vishay.com vishay bccomponents revision: 18-jul-13 7 document number: 28116 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 insulation resistance as a function of ambient temperature application notes ? for x1 electromagnetics interference suppression in standard across the line applications (50 hz/60 hz) with a maximum mains voltage of 440 v ac . ? for series impedance applications we refer to application note: www.vishay.com/doc?28153 ? for capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. for information depending of the capacitance value an d the number of parallel connections contact: rfi@vishay.com ? these capacitors are not intended for continuous pulse applic ations. for these situations, capacitors of the ac and pulse programs must be used. ? the maximum ambient temperature must not exceed 105 c. ? rated voltage pulse slope: ? if the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 615 v dc and divided by the applied voltage. ? inspection requirements general notes sub-clause numbers of tests and performance requirements refe r to the sectional specification, publication iec 60384-14 ed-3 and specific reference data. group c inspection requirements sub-clause number and test cond itions performance requirements sub-group c1a part of sample of sub-group c1 4.1 dimensions (detail) as specified in chapters general data of this specification ? initial measurements capacitance tangent of loss angle at 10 khz ? 4.3 robustness of terminatio ns tensile: load 10 n; 10 s bending: load 5 n; 4 x 90 ? no visible damage 4.4 resistance to solder ing heat no pre-drying method: 1a solder bath: 280 c 5 c duration: 10 s 10 6 10 5 10 4 0 20 40 60 80 100 t amb (c) rc (s)
mkp338 1 x1 www.vishay.com vishay bccomponents revision: 18-jul-13 8 document number: 28116 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 sub-group c1a part of sample of sub-group c1 4.19 component solvent resistance isopropylalcohol at room temperature method: 2 immersion time: 5 min 0.5 min recovery time: min. 1 h, max. 2 h ? 4.4.2 final measurements visual examination no visible damage legible marking ? capacitance | ? c/c| ? 5 % of the value measured initially ? tangent of loss angle increase of tan ? ? 0.008 compared to values measured initially ? insulation resistance as specified in section insulation resistance of this specification sub-group c1b part of sample of sub-group c1 initial measurements capacitance tangent of loss angle at 10 khz ? 4.20 solvent resistance of the marking isopropylalcohol at room temperature method: 1 rubbing material: co tton wool immersion time: 5 min 0.5 min ? no visible damage legible marking 4.6 rapid change of temperature ? a = - 55 c ? ? b = + 105 c 5 cycles ? duration t = 30 min ? 4.6.1 inspection ? 4.7 vibration visual examination mounting: see section mounting of this specification procedure b4 frequency range: 10 hz to 55 hz amplitude: 0.75 mm or acceleration 98 m/s2 (whichever is less severe) total duration: 6 h ? no visible damage 4.7.2 final inspection visual examination no visible damage ? 4.9 shock mounting: see sect ion mounting for more information pulse shape: half sine acceleration: 490 m/s2 duration of pulse: 11 ms ? 4.9.2 final measurements visual examination no visible damage ? capacitance | ? c/c| ? 5 % of the value measured initially ? tangent of loss angle increase of tan ? ? 0.008 compared to values measured initially ? insulation resistance as specified in section insulation resistance of this specification group c inspection requirements sub-clause number and test cond itions performance requirements
mkp338 1 x1 www.vishay.com vishay bccomponents revision: 18-jul-13 9 document number: 28116 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 sub-group c1 combined sample of specimens of sub-groups c1a and c1b 4.11 climatic sequence ? 4.11.1 initial measur ements capacitance measured in 4.4.2 and 4.9.2 tangent of loss angle measured initially in c1a and c1b ? 4.11.2 dry heat temperature: 105 c duration: 16 h ? 4.11.3 damp heat cyclic ? test db ? first cycle ? 4.11.4 cold temperature: - 55 c duration: 2 h ? 4.11.5 damp heat cyclic ? test db ? remaining cycles ? 4.11.6 final measurements visual examination no visible damage legible marking ? capacitance | ? c/c| ? 5 % of the value measured in 4.11.1. ? tangent of loss angle increase of tan ? ? 0.008 compared to values measured in 4.11.1. ? voltage proof 1900 v dc ; 1 min between terminations ? no permanent breakdown or flash-over insulation resistance ? 50 % of values specified in section insulation resistance of this specification sub-group c2 4.12 damp heat steady state 56 days, 40 c, 90 % to 95 % rh ? no load ? 4.12.1 initial measur ements capacitance ? tangent of loss angle at 1 khz ? 4.12.3 final measurements visual examination no visible damage legible marking ? capacitance | ? c/c| ? 5 % of the value measured in 4.12.1. ? tangent of loss angle increase of tan ? ? 0.008 compared to values measured in 4.12.1. ? voltage proof 1900 v dc ; 1 min betwee n terminations ? no permanent breakdown or flash-over insulation resistance ? 50 % of values specified in section insulation resistance of this specification group c inspection requirements sub-clause number and test cond itions performance requirements
mkp338 1 x1 www.vishay.com vishay bccomponents revision: 18-jul-13 10 document number: 28116 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 sub-group c3 4.13.1 initial measur ements capacitance ? tangent of loss angle at 10 khz ? 4.13 impulse voltage 3 successive impulses, full wave, peak voltage: x1: 4 kv max. 24 pulses ? no self healing breakdowns or flash-over 4.14 endurance duration: 1000 h 1.25 x u rac at 105 c once in every hour the voltage is increased to 1000 v rms for 0.1 s via resistor of 47 ?? 5 % ? 4.14.7 final measurements visual examination no visible damage ? legible marking ? capacitance | ? c/c| ? 10 % compared to values measured in 4.13.1. ? tangent of loss angle increase of tan ? ? 0.008 compared to values measured in 4.13.1. ? voltage proof 1900 v dc ; 1 min between terminations 2380 v ac ; 1 min between terminations ? and case. ? no permanent breakdown or flash-over insulation resistance ? 50 % of values specified in section insulation resistance of this specification sub-group c4 4.15 charge and disc harge 10 000 cycles charged to 615 v dc ? discharge resistance: 4.15.1 initial measur ements capacitance tangent of loss angle at 10 khz ? 4.15.3 final measur ements capacitance | ? c/c| ? 10 % compared to values measured in 4.15.1. ? tangent of loss angle increase of tan ? ? 0.008 compared to values measured in 4.15.1. ? insulation resistance ?? 50 % of values specified in section insulation resistance of this specification sub-group c5 4.16 radio frequency characte ristic resonance frequency ? 0.9 times value as specified in section resonant frequency of this specification group c inspection requirements sub-clause number and test cond itions performance requirements r 615 v dc 1.5 x c (du/dt) --------------------------------------- - =
mkp338 1 x1 www.vishay.com vishay bccomponents revision: 18-jul-13 11 document number: 28116 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 sub-group c6 4.17 passive flammability ? class b bore of gas jet: ? 0.5 mm fuel: butane test duration for actual volume v in mm3: v ? 250: 10 s 250 < v ? 500: 20 s 500 < v ? 1750: 30 s v > 1750: 60 s one flame application after removing test flam e from capacitor, the capacitor must not continue to burn for more than 10 s. no burning particle must drop from the sample. sub-group c7 4.18 active flammability 20 cycles of 4 kv disc harges on the test capacitor connected to u rac . the cheese cloth around the capacitors shall not burn with a flame. no electrical measurements are required. group c inspection requirements sub-clause number and test cond itions performance requirements 45.0 ~ 8 mm 12 mm
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.

▲Up To Search▲

Price & Availability of BFC233810683

	To Download BFC233810683 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .